|Type:||Other Heat Insulation Materials||Port:||Shenzhen|
|Name:||Insulation Materials For Building||Feature:||Cold Resistant,flexible Soft Insulation,waterproof. Soundproof Eco-friendly And So On.,thermal Insualtion,Fireproof|
|Product Name:||Polyethylene Fabric Woven,cross Linked Polyethylene Foam||Material Structure:||Al + XPE+Al / Al +XPE,AL/EPE Foam/AL|
foam insulation sheets,
building insulation foam
|Compression Set 25% 0.5H||ISO-1856||%||15.80|
|Compression Set 25% 24H||ISO-1856||%||5.80|
|Operating Temperature Range||Internal||°C||(-40,+80)|
|Water Absorption % Volume (Maximum)||Internal||%||0.50|
|Thermal Conductivity||JIS A1412-2||W/mK||0.040|
|Shore - C||ASTM D2240||°C||23|
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 15mm thick specimen and should be considered as guidelines only.
● Processing method by eletronic heating.
● 12 kg/100m2 glue.
CYG Insulation foam is a flexible thermal insulation material made from closed cell, cross-linked polyethylene foam. The special cross-linking utilized in the production of the material, as well as, its closed cell structure, results in insulating properties that are superior to fiberglass, rubber based and non cross-linked products.
A very low thermal conductivity value(K), and negligible water absorption and vapour transmission rates reflect in its superior energy saving performance, in variety of environments.
1. excellent heat insulation performance:
low thermal conductivity, <0.040W/m · k, less than polystyrene, similar to polyurethane, as the excellent insulation, heat insulation materials;
2. high apparent density:
apparent density reach to 28±2kg/m ³,superior to polyurethane and phenolic foam; reduces the building's weight, load of the building and cost of the structure.also easy and fast to construct, and improve efficiency;
3. qualified combustion performance:
combustion performance reach the B2 level of building and decoration material class, the same as polystyrene;
4. good corrosion resistance and ageing resistance: resistance to acid and organic solvents,long-term exposure to the Sun, minor aging, special anti-aging treatment but can be done;
5. superior production technology to meet different needs: continuous and controllable production process meets different requirements of the length and width, effectively reducing the waste during transportation and installation.
Contact Person: Maddy Guo
Tel: +86 15818791557