|
Product Details:
|
| Type: | Other Heat Insulation Materials | Density: | 30-300kg/m3 |
|---|---|---|---|
| Thermal Conductivity: | ≤0.031W/mk | Product Name: | Polyethylene Fabric Woven,cross Linked Polyethylene Foam |
| Material Structure: | Al + XPE+Al / Al +XPE,AL/EPE Foam/AL | Length: | Customized |
| Temperature Range: | -50℃~110℃ | Application: | Construction |
| Thickness: | 6-30mm,4-10mm | ||
| High Light: | closed cell foam insulation,foam insulation sheets |
||
|
||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 33.33 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.39~0.41 |
| Longitudinal | 0.23~0.28 | |||
| Tearing Strength | Transverse |
ISO-8067
|
Kn/m | 1.84~2.26 |
| Longitudinal | 1.32~1.40 | |||
| Compression 25% | ISO-3386-1 | kPa | 36.80 | |
| Compression 45% | ISO-3386-1 | kPa | 66.70 | |
| Compression 50% | ISO-3386-1 | kPa | 96.90 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 15.80 | |
| Compression Set 25% 24H | ISO-1856 | % | 5.80 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.50 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.040 | |
| Shore - C | ASTM D2240 | °C | 23 | |
| Flammability | FMVSS302 | mm/min | - | |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 15mm thick specimen and should be considered as guidelines only.
● Processing method by eletronic heating.
● 12 kg/100m2 glue.
1. Excellent heat insulation performance: Low thermal conductivity, <0.040W/m · K, less than polystyrene, similar to polyurethane, as the excellent insulation, heat insulation materials;
2. High apparent density: Apparent density reachs to 28± 2kg/m ³ , superior to polyurethane and phenolic foam; Reduces the building's weight, load of the building and cost of the structure. Also easy and fast to construct, and improve efficiency;
3. Qualified combustion performance: Combustion performance reach the B2 level of building and decoration material class, the same as polystyrene;
4. Good corrosion resistance and ageing resistance: Resistance to acid and organic solvents, long-term exposure to the Sun, minor aging, special anti-aging treatment but can be done;
5. Superior production technology to meet different needs: Continuous and controllable production process meets different requirements of the length and width, effectively reducing the waste during transportation and installation.
Company info
CYG TEFA Co., Ltd, a national high-tech company, established in December of 2002. Now we have 2 production bases in Shenzhen, Hangzhou, with annual production capacity of 6000 tons;
We are the leading manufacturer for XPE , IXPE foam,ESD foam for more than 17 years, all our products can be used for thermal insulation,waterproof,shockproof,etc. and also our products get the UL, ISO, SGS, Rohs, Reach , CE approval. and we have 17 production lines for production.Hope to cooperate with you.
IXPP project (three years: Proposal stage - Develop - Sampling - Approved product- Small quantity supply for testing
11 employee
Investment rate: 4% to 10%
Responsible for : Improving available product / Technology improving / New product development / New devices.
Contact Person: Rechel Zhong
Tel: +86 138 2878 3541
Fax: 86-755-26631759
