|Type:||Other Heat Insulation Materials||Density:||25-330KG/m3|
|Expansion Ratio:||3,5,8,10,15,20,25,30,35,40 Times,or As Requests||Style:||Sheet,roll Or Customized|
|Thickness:||0.5-100 Mm Or As Requests||Max Width:||2500mm, Or Customized|
closed cell foam insulation,
foam insulation sheets
floor heating insulation price thermal roof wall material pe foam board
Electronic cross-linked polyethylene foam also named Physical crosslinked polyethyele foam, Irradiation crosslinked polyethylene foam.Common abbreviations IXPE foam, IXLPE foam.It is made of low-density polyethylene (LDPE), AC foaming agent and other powders after being melted, mixed and extruded, and then foamed at high temperature. IXPE has finer cells, smoother surface and better mechanical properties than XPE.
Production process: compounding-extrusion-irradiation-foaming.
Note: IXPE foam can be made anti-static (we will talk about anti-static IXPE later), but XPE cannot (theoretically it is possible, but our company does not currently produce).
|Compression Set 25% 0.5H||ISO-1856||%||13.22|
|Compression Set 25% 24H||ISO-1856||%||4.68|
|Operating Temperature Range||Internal||°C||(-40,+80)|
|Water Absorption % Volume (Maximum)||Internal||%||0.40|
|Thermal Conductivity||JIS A1412-2||W/mK||0.055|
|Shore - C||ASTM D2240||°C||30|
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 4mm thick specimen and should be considered as guidelines only.
Raw material: LDPE, PE foam+Alu foil
Wide: 70~1800 mm
xpe 2~3mm 3~12mm
Ixpe 0.1~0.5mm 0.5~3mm, 3~10mm
Color: black,white and gray,other colors can be customized
Shore hardness: 10~80 degree
Surface smooth: Alu
Thermal Conductivity:0.040~0.095 w/m.k
Water Absorption:(23degree,24h) 0.2~0.6%
Tearing Strength: 0.2~1.8 KN/m
Elongation at break :100%~240%
Tensile Strength: 0.2~1.6 Mpa
Compressed distortion: 2%~10%
Size change rate: -4%`-8%
Thermal conductivity: 0.040 ~0.095 w/m.k
Packaging:roll, tape, gasket or seal formats
CYG TEFA is the earliest PE foam manufacturing with scale production in China since 2002.Mainly produce XPE FOAM,IXPE FOAM,IXPP FOAM and ESD PRODUCT(Foam type: PE/EVA/PU/EPE/PP Plastic).Annual production capacity is about 6000 tons.2 bases one in Shen zhen and an other in Huzhou,with total 17 production lines.CYG Management control system: Kingdee / OA / Oracle.CYG have a professional team and technology.More than 30 R&D staff.Through the great variety of our products we provide people with a warm and quiet home and working environment.
Contact Person: Cissy Zhang
Tel: +86 13759797661