closed cell foam insulation,
foam insulation sheets
Low density cross-linked polyethylene foam insulation for building ,aterial
1. Sound-absorbing, water proof
2. Customized size and structure
4. Polyethylene foam aluminum foam insulation
5. Max width:2.5m
|Name||High Density XPE/IXPE Aluminum Fire Retardant Foam Thermal insulation material|
1.Can be installed on roof, wall or floor, resist over 80% external heat from buildings, protect wall, resist thermal shock and sudden cold, etc.
2.Dampproof is the isolated layer between floor and ground ,which layed close to ground in order to enhance moisture protection ,flooring protection, increase flexiblity and make the ground flat.
3.Heat insulation and light inflecting in construction and protection for both cold water and hot water pipe
|Thickness||2mm-100mm (Special design for requirements|
|Color||black, blue, gray, green, orange (Special design for requirements)|
|Size||design for requirements|
2.softly handle, good tearing strength
3.light weight ,good flexibility, and cushioning
4.invariable if it is attacked repeatedly ,good highly resistant to shock.
5.isolated foam structure, less ,low thermal conductivity and superior heat insulation
6.100% sealed chamber, good sound-absorbing, Noise prevention.
Features of XPE Insulation Material
1. Light weight, clean, good flexibility and cushioning;
2. Invariable if it is attacked repeatedly;
3. Low thermal conductivity and superior heat insulation;
4. Outstanding safety and environmentally friendly;
5. Easy to install, high efficiency;
6. Cost effective and versatile.
Application of XPE Insulation Material
1) Roof,wall,floor, Attic for heat insulation and thermal insulation;
2) Shells of air conditioner and water heater;
3) Protective coatings of water pipe and ventilating pipe;
4) Machinary packing;
5) Making ice package
1. Effective in temperatures both hot and cold
2. Strong but clean ,light weight and flexible
3. Easy Installation
4. Safe to handle with no special clothing or breathing Equipment
5. Cuts and installs easier than fiberglass
6. Reflects 97% of Radiant Heat
7. Easily stapled, nailed or glued into place
8. Waterproof,non-absorbent surface, recycled ,friend environment.
CYG TEFA Co., Ltd. is a subsidiary of CYG Group Co.,Ltd (stoke code ,600525). CYG TEFA CO.,LTD established in December of 2002.
We are the leading manufacturer for XPE , IXPE foam,ESD foam for more than 14 years, all our products can be used for thermal insulation,waterproof,shockproof,etc. and also our products get the UL, ISO, SGS, Rohs, Reach , CE approval. and we have 17 production lines for production.Hope to cooperate with you.
CYG foam insulating products with good flexibility make them suitable for bent and irregular pipes in construction, saving both labor force and cost
CYG foam heat-proof and heat-preservation plastic-rubber with high elasticity ,can reduce the vibration and resonance of the hot /cold water pipes utmost
This product has fire-blocking and smoke-reducing property , when burned , its density is very low and doesn’t melt, without any small fire ball left and with the merit of self-extinguishing.
According to the standard of GB/T 8624 Method for grading flammability of construction material, this is the flame resistant product of grade B1 enabling to secure the satiety
Low conductivity factor
Conductivity of this material is 0.034w/mk at an average°C.As this product has high heat-releasing ratio, it can get the same heat-preservation effect at less half thickness of other insulating product under the same condition, saving not only space but also cost.
Certificate authentication :
We complied with SGS, ROHS ,ISO9001etc.international standards.
Any size can be customized .
Contact me and get more details
Contact Person: Maddy Guo
Tel: +86 15818791557