|
Product Details:
|
| Material: | Pe | Adhesive Side: | Double Sided |
|---|---|---|---|
| Adhesive Type: | Hot Melt | Feature: | Heat-Resistant |
| Color: | Any Color | Width: | As Request |
| Length: | As Request | Thickness: | 1~10 Mm Or Customized |
| Structure: | Closed Cell Structure | Hardness: | 10-80 Shores |
| High Light: | xlpe foam sheet,closed cell cross linked polyethylene foam |
||
Advantages
1) Waterproof, clean, light, flexible, non-absorbent surface
2) Recyclable, environmentally friendly
3) Easily install, cut, stapled, nailed or glued into place
4) Effective in extreme temperatures both hot and cold
5) Safe to handle with no special clothing or breathing Equipment
6) Easy to cut and install, without the protective clothing or respirators during installment.
7) Does not support the growth of fungus or mold.
8) Vapor and radon retarder
9) Not affected by moisture or humidity
IXPE foam is a kind of insulation foam based on low-density polyethylene. Perform smooth surface, tightly closed cell structure by using electronic irradiation.Irradiated Crosslinked polyethylene foam(IXPE FOAM) is very fine celled microcellular foam. Irradiated crosslinked foam is used for medical applications, heart forming, and high end protective packaging and consumer products. This foam can actually be printed on very clearly.Ideally suited as the component or part requiring a shock absorbing, vibration dampening, insulation foam material.
Thin PE foam is one the Irradiated Polyehtylene foam. it's thickness between 0.5mm to 3mm thick. and it can be use to make into PE foam tape.
Available in elastic & easy tear PE foam. Produced by coating acrylic solvent adhesive on the both sides of the foam and separated by release paper. It adheres well to a variety of surfaces and exhibits excellent holding power
Specifications
|
||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 200.00 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 1.55~1.56 |
| Longitudinal | 1.80~1.83 | |||
| Elongation | Transverse | ISO-1798 | % | 213.50~220.20 |
| Longitudinal | 217.70~224.40 | |||
| Tearing Strength | Transverse |
ISO-8067
|
Kn/m | 6.78~7.14 |
| Longitudinal | 8.00~8.21 | |||
| Compression 25% | ISO-3386-1 | kPa | 328.00 | |
| Compression 40% | ISO-3386-1 | kPa | 389.20 | |
| Compression 50% | ISO-3386-1 | kPa | 486.00 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 8.00 | |
| Compression Set 25% 24H | ISO-1856 | % | 3.10 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.20 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.095 | |
| Shore - C | ASTM D2240 | °C | 55 | |
| Flammability | FMVSS302 | mm/min | - | |
Applications
FQA
1)What is closed-cell?
A: Polyethylene foam is closed-cell, meaning it consists of cells so tightly packed together that it gives the appearance of one uniform structure.
The reality is that the individual cells within polyethylene foam do not physically connect to one another.
This cellular formation is similar to fish caught in a fisherman's net.
2)Why choose Low-density polyethylene foam?
A: Low-density polyethylene foam has numerous applications because of its many desirable properties including water-resistance, chemical resistance, energy-absorbance, buoyancy and cushioning characteristics. Compressive strength is greater in denser foams, decreasing as density decreases. Low-density foams tend to exhibit more compressive creep, meaning they become less thick over time than higher-density foams.
3)How can I know the suitable foam density I need?
A: Our PE foam density is between 25 kg/m3 and 240 kg/m3
We can provide the best solution for you according to the application, Density, hardness, thickness.And The free sample is available for your confirmation and text
4) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (ABC bank) and Paypal, Western Union are the most usual ways we are using for freight fees of PE foam samples.
5) What’s the order procedure?
A: First we discuss foam products details by email or TM.
Then we issue you a PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. usually takes 7-15days if we don’t have the items in stock.
Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
6)How do you take care when your clients received defective foam products?
A: replacement. If there are some defective foam products, we usually credit to our customer or replace in next shipment.
7)How do you check all PE foam on the production line?
A: We have spot inspection and finished product inspection of our foam materials.We check the PE foam materials when they go into next step production procedure.
Contact Person: Joey
Tel: +8613879662482
Fax: 86-755-26631759
